2018 Isuzu NPS75-155 4x4 Service Truck. Has the big 5.2ltr turbo diesel engine, big 7500kg GVM (Capable of carrying an extra Tonne more than previous model) and includes everything below from $139990 Driveaway. Pre-built and good to go!
Heavy duty custom built service body to be 4000mm long x 2250mm wide steel tray, 3mm steel chequer plate floor, reinforced cab rack with channel uprights pre-drilled light rack and guard on top. 280mm drop sides enclosing the rear section of the tray behind the boxes, eight
(8) recessed tie down rings fitted to the tray floor.
(1) pressed 1.6mm zinc anneal locker to O/Side of tray, 2400mm long x 500mm deep x 1000mm high with vertical dividers and shelving, flush fit gull wing doors with gas stays, sealock seals, 3 point stainless steel drop T lock, pressed galvo drop down work tray with chain supports and two side mounted padbolts for locking into position in front of four (4) pressed galvo removable drawers, supply 24 loose pressed galvo dividers for partitioning of the drawers.
One (1) pressed 1.6mm zinc anneal locker to N/Side of tray, 2400mm long x 500mm deep x 1000mm high with vertical dividers and shelving, flush fit gull wing doors with gas stays, sealock seals, 3 point stainless steel drop T lock.
One (1) pressed centre locker, 1200mm Long x 500mm deep x 420mm high at front of tray between side lockers mounted on rubber mount suspension, level with top of the side boxes.
A 150mm engineers vice fitted to O/Side rear of tray on an H/Duty zinc coated vice mount and 300mm x 300mm x 10mm plate steel.
75mm x 75mm x 6mm RHS built into tray base to suit a Kevrek tray mounted crane.
Steel crow bar tube with pull stick fitted to front of cab rack.
A fixed position battery cradle to house 2 x N50 (standard) and 2 N150 batteries with a removable alloy guard plate.
H/Duty spare wheel carrier and ramp with a base plate for support and tyres secured to the centre and N/Side positions.
Variable oxy, accet and nitrogen bottle mounts fitted to the back of both boxes.
A PVC ripstop cove between the boxes utilising press studs ad Velcro fixings.
Reece style tow hitch with a stair tread grill mounted level with top of ball and trailer plug.
A 3 points of contact access point at rear of tray utilising the tread step mentioned above.
60 Litre water tank and soap dispenser fitted to O/Side rear of tray.
Retractable air hose reel fitted and plumbed to compressor.
4.2Kg fire extinguisher mounted behind the driver to front of cab rack.
Gekco LED strip lights fitted to each side locker and quality door open alarms with buzzer in cab.
High mounted LED lights.
1.2mtr whip antenna/flag mounted to cab rack.
One (1) beacon fitted to cab rack, four (4) work lights, two on cab rack and two on rear of each side box.
Isolator switch at the battery box and voltage equaliser.
Tray and lockers painted to suit cab, grey oxide paint on tray top.
WD 20/120 Westair diesel driven compressor.
Kevrek 1000S crane with manual stabilizer leg. Crane hand held pendant with 5 metre lead.
All lights and wiring to ADR and police regulations.
VSB6 compliance, loaded to chassis with mudguards and mudflaps
$139990 Driveaway or $149990 Driveaway with ROPS